Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. CAN bus immobiliser. It is discrete, does not use LED indicators or key fobs, and is concealed in the vehicle's wiring.
The user can also disable the system temporarily using Transport Mode when renting their vehicle. This guide will take you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against key cloning, hacking and relay attacks. The system is connected directly to the ECU of your vehicle and secured by a PIN code you select. It is undetectable by thieves using diagnostic scanners and other modern methods. It is not able to be disabled by cutting circuits.
The system is easy to use, however professional installation is recommended to ensure a clean connection to the ECU of your vehicle. Installers approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also suggest an alarm or tracking system to complete the protection package for your vehicle.
To avoid an accidental deployment of airbags or short circuits To avoid an accidental deployment of airbags or short circuits, the installer must disconnect your battery. When the battery is disconnected, the installer can be able to work safely. Hand tools are the most basic to be used to ensure precise connections. A multimeter can be used to check electrical values. Insulation tape and cable ties are also necessary for securing connections and keeping wiring neat. Resource will provide specific guidelines specific to your particular model.
During the installation process, it's crucial to select an area for grounding that is free of paint and debris. The installer should also make sure the immobiliser's H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. The wires can be plugged in or soldered depending on the model. To ensure a reliable and durable connection it is recommended you use a high-quality plug.
After the installation is completed Once the installation is completed, the customer can enable after the installation is complete, the customer can activate Transport Mode. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. To accomplish this, the user must press the service button on the dashboard five times in a matter of 2 seconds. After this is done, the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's a great choice for anyone who frequently rents out their vehicles through platforms such as Turo. Having an immobiliser can also lower insurance costs since it reduces the likelihood of theft.
Getting Started
If you're looking for a solution to protect your vehicle from thieves, you can't go wrong with an autowatch ghost immobiliser. The device protects your vehicle from starting even if a criminal steals or copies the key. It's possible due to its advanced technology that stops the engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus system CAN which allows direct communication with the ECU. It uses the buttons on your dashboard and steering to create a unique sequence which only you know. This makes it impossible for anyone else to start your vehicle. This is the ultimate security system that protects your pride and joy and preserve its value should you decide to sell it in the future.
Installing a ghost immobiliser is an easy process, however, it's important to follow the instructions carefully to avoid issues with electricity and system malfunctions. First, you must locate and identify a constant 12V power source as well as an appropriate grounding point on the vehicle's chassis. Then, you can begin to connect the wires that will be used to activate the immobiliser. Make use of high-quality connectors and soldering techniques to ensure an effective connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to avoid short circuits of electricity.
After the wires have been connected, you can connect the battery and then turn on the engine to test the immobiliser's functionality. Once you have verified that everything is functioning properly then you can put the immobiliser in a safe location in the vehicle. Make sure you hide it properly to stop thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it is a top-quality deterrent for car thieves. It is resistant to hacking and key cloning and cannot be disabled without a code. The device is also simple to use and can be set into a service valet mode so that your automobile will not be activated when you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to deter theft of vehicles. It connects directly to your car's CAN bus network and communicates with the ECU which makes it virtually undetectable to your car. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with any of the factory settings of your vehicle.
It's also completely undetectable to thieves using diagnostic scanning devices. The system doesn't send or receive radio frequency signals, but instead uses CAN data for communication with your ECU. Furthermore, it doesn't require any modification to your car's existing key fobs.
Enter your disarm sequence (either two or one buttons) and then switch on the ignition in your car to activate Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your vehicle and leave with peace of mind.
Once installed The Ghost Immobiliser can safeguard your vehicle from hacking and key cloning, while protecting the value of your pride and joy. If you have to surrender your car for service or valet parking The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll need a constant power source (12V) as well as a grounding source to complete the installation of a Ghost immobiliser. Ensure that these are both well-insulated and safe to touch. Cable ties are also recommended to secure the wires. This will reduce the risk of theft by potential thieves. Make sure you check the exact position of these points to avoid mistakes, and mark them with an adhesive or label. It's also a good idea to inspect every connection for signs of wear and tear. Make sure that all connections are securely in place, and properly protected. Don't forget to test your Ghost Immobiliser after installation has been completed. This will make sure that the unit functions properly and that all connections and insulation are secure. Make sure to address any problems immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that works seamlessly with your vehicle's ECU in order to prevent the motor from starting without authorization. The innovative technology protects your vehicle against hacking and key cloning along with other common methods used by thieves to steal cars. The Ghost also works in tandem with existing alarm and tracking systems to provide the best protection for your vehicle. This system's unmatched features and secluded design make it a popular option for car enthusiasts and security-conscious motorists alike.
It is crucial to follow the steps of installation to ensure a complete integration of the Ghost Immobiliser. The best place to start is to refer to the vehicle's wiring diagram that serves as a guideline for locating and connecting the necessary wires. Then, you'll need to identify the power source and grounding points. Once you've found them, you'll be required to mark the points to make them easy to locate during installation. In addition, it is vital to use only the best tools and materials. Basic hand tools can assist with making precise connections while a multimeter can verify electrical values and ensure safety. Insulation tape and cable tie will ensure that all connections are tidy. A Ghost-specific user's manual is also available.
It is crucial to test the system prior installing it. Enter the PIN code into the system and then start the vehicle. This step will confirm the immobiliser is working as it should and will stop vehicle starts that are not authorized. This procedure should be carried out regularly as part of your routine inspections of your vehicle to ensure the system is always working correctly.
After the installation is completed, you can drive your vehicle with confidence. The Ghost will keep your precious possessions safe from would-be thieves and ensure that no one can take off with your vehicle without the correct PIN. The Ghost can be used in conjunction with an approved Thatcham tracker that detects any attempts to steal or tamper with. This lets you locate your car if it's stolen.
The Ghost can be utilized on a wide range of vehicles and is compatible with the majority of major brands. If you are interested in securing your car with this innovative device, contact Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA Registered installer, a certification that guarantees that we follow strict guidelines and procedures when installing our products. This assures insurance companies, customers and law enforcement agencies that all installations are performed in a safe and correct manner.